I had the same issue with the same model running non stop and never building over 115 lbs. it was so noisy I could hardly stay in the same building while it run certainly not in the same room. I no longer have that issue. I turned it on went out of the house planing to return shut it off and continue work. I did not need to shut it off because on my return it had stoped running and on the floor surrounding it was a thin plastic debris field where something under the shroud had exploded but was contained by the shroud. I’ve removed the shroud but thus far have not had the luck, or interest to figure what blew up. Any guesses?
I have a Husky model # F2S20VWD , its a 20gal 150 PSI, Problem is it will continuously run, will not reach 150psi, only gets to about 115, I replaced the check valve # E106123, thinking because air is always coming out the hole. this did not fix the issue.any ideas? pressure valve?
I have that same model and that same issue. I almost ordered a check valve thinking the same as you Rob. I guess I’ll take the shroud off and look at a couple other things associated in the article willyr suggests first.
Please click here to review and OK our privacy policy.
Our website may use cookies to gather various metrics to help make your
visit more meaningful.
If you are not in agreement with our privacy policy please abstain from using
our website. Thank you.
I don’t know how to change the bit on the compressor. Please help.
Hi there. I’m afraid I don’t know what you mean by “bit” on the compressor. Can you provide more info?
I had the same issue with the same model running non stop and never building over 115 lbs. it was so noisy I could hardly stay in the same building while it run certainly not in the same room. I no longer have that issue. I turned it on went out of the house planing to return shut it off and continue work. I did not need to shut it off because on my return it had stoped running and on the floor surrounding it was a thin plastic debris field where something under the shroud had exploded but was contained by the shroud. I’ve removed the shroud but thus far have not had the luck, or interest to figure what blew up. Any guesses?
Gary
I have a Husky model # F2S20VWD , its a 20gal 150 PSI, Problem is it will continuously run, will not reach 150psi, only gets to about 115, I replaced the check valve # E106123, thinking because air is always coming out the hole. this did not fix the issue.any ideas? pressure valve?
Well Rob, the tank check valve is certainly one of the things to check. Others can be found here: //fix-my-compressor.com/compressor-will-not-build-pressure/ .
I have that same model and that same issue. I almost ordered a check valve thinking the same as you Rob. I guess I’ll take the shroud off and look at a couple other things associated in the article willyr suggests first.